Rainmeter is an open source Windows program used for monitoring anything.  By ‘anything’, they mean it.

I’ve built a few meters that are probably of interest to other ham radio operators.  So far, I’ve created meters for the Solar Number, Solar Flux Index, A Index, K Index, and to show the X-Ray Solar Image.  All of these update from the NOAA Space Weather website.

I would love to hear any comments or suggestions in the comments section below or via email (andrew at siliconcreek.net).

Version 0.9.2 (31 July 2011)

Download Here

Made some changes to the look of the meters – added borders, changed the text to black.  Also added a ‘hot link’ to the solar X-Ray image to send you directly to the large image on the NOAA website.

I added the maximum fluctuations to the K-Index meter.  It seems a lot of sites show this, and while it seems that it really isn’t an absolute necessity, N0NBH’s Solar Weather Image shows that, as does the NOAA Space Weather WWV Report, so I went ahead and added it.

Also added two new configs for DX Spots.  After little investigation, I decided to set things up to go to the Ham Call DX Spotter.  This is because it is the only one I’ve seen that has totals by band.  I split the spots for HF and VHF/UHF because I anticipate that most people will be interested in one or the other.  This is setup with an update rate of every 5 minutes (it is in the .ini file with the code).  If you want to change it, make it higher.  I didn’t talk with anyone at HamCall.net prior to doing this, and we certainly do not want to irritate them by overdoing things.

Version 0.9.1 (29 July 2011)

Download Here

Added K index and solar image.  See the image below (shot on my Windows 7 computer).

Version 0.9.0 (26 July 2011 – First Release)

The screenshot above shows the A-Index, Solar Flux Index, and Solar Number.  So far, that’s all the meters I’ve done so far.  These are updated periodically from the NOAA Space Weather Prediction Center website.

I’m making this available to anyone interested.  I will be update this periodically with additional meters (K index and maybe something related to DX Spots).  If you have any ideas, feel free to leave them in the comments)

Download Here.

To install, start by installing Rainmeter from the website.  Then, unzip the contents of this in Documents\Rainmeter (so the files in the zipfile are under AC8JO and there are folders for the A Index, SFI, and SN).  Right-click on one of the Rainmeter skins and go to refresh. Then, you should be able to right-click on a skin and add any or all of the solar measure skins.